Teknik özellikler 1. Decoiler
İki konik elektrikli bulgy kelepçesi ve taşıma kapasitesi 8 tondur. Rulo malzemesinin iç çapı yaklaşık 500 ila 600 mm'dir, maksimum çelik bobin çapı 1800 mm'dir. Kelepçe motor gücü 4 kutuplu normal motorla 2.2kW'dır. ZQ250 hız azaltıcısını benimseyin, hız oranı 31: 5'dir.
2. Düzey Makine
İki yuvarlak tutam ve beş roll tesviye ile yedi-roller seviyesi. Tesviye silindir çapı 110 mm'dir. Önceki ve sonrası tesviye makinesi dikey kılavuz rulosu vardır. NIP ruloları ile donatılmış giriş portunu besleyin.
Malzeme: 40CR, Söndürülmüş Sertlik: HRC48 ° ~ 52 °, Motor Güç: 7.5kW, 6 kutuplu normal motor, ZQ350Speed Reducer, Hız Oranı: 20:49, φ200 Arrester Fren.
3.
YL32-315 dört sütunlu hidrolik delme makinesini ve hidrolik istasyon motor gücü 22kW'dır. Bir set iki dalgalardan oluşan bir set, kesici kesme, tasarımı ve işlemi esas olarak kullanıcıların tasarım çizimlerine göre yumruklar. Kalıp eklerinin ve piston çipinin malzemesi CR12MOV alaşımlı çeliktir. Önceki ve sonrası delinme makinesi ayarlanabilir kılavuz rulo ile donatılmış. (Kılavuz Rulo Malzemesi: CR12MOV, Sertlik: HRC58º ~ 60º) Ayrıca, bir dizi yedek bıçak ve piston çip ile donatılmıştır.
4.rapid feeding material mechanism
It has two pairs of feeders and requires two becomes one.
pinch automatically, motor power:2.2 kw, ZQ250 speed reducer, hand-turn compressing
5.Photoelectric Length-measuring Device
number: two pairs, cut length: 4320mm, length accuracy < ±3.0mm
6. Main Forming Engine
This unit includes 11 molding processes with independent open arch structure.
The mechanical spreading width : 550mm.
Arch material : HT200 , tempered.
The column cross-section size: 80 x 70, with sufficient strength and reliable quality assurance. Vertical guiding roller numbers: 3
Roller diameter of vertical guiding roller: 80
Material: 40Cr steel, quenched and tempered.
Bearing type: Fixed surface 7216, regulation 32216, each has 4.
Numbers of dual-axis gear box: 1
Numbers of single-shaft transmission gear box: 9
Bevel modulus: M=9
Gear box material: HT200.
Host power: 45KW r, electromagnetic speed regulating,
Speed reducer: ZQ650
Speed ratio: 48.57
Use 1 inch double chain drive between the transmission gear box ; universal transmission shaft between the roller shafts, and the universal transmission shaft type is140-275. Use 1.5 inch dual chain drive between the speed reducer.
7.Forming Mold
A set of two wave guardrail plate roll forming die, designed and processed according to the national standard. The material is GCr15, and the overall quenching hardness is HRC58°~ 62°.
8.material Receiving Platform
Roller type material receiving station, 5m length, 6# steel welded.
9.Control System
Common control system. Can manually and automatically control the harmony of various parts of of the whole production line.
10.Others
The equipment total power is 78.9Kw, with 30000mm * 4000mm length * width. The maximum rolling height is 85mm, the maximum rolling thickness is 4.0mm, and the maximum rolling speed is 3 ~ 12m/min. Structural materials of welding machine seat must meet the requirements, welding must be up to the national standard . Equipment after rust cleaning should be firstly coated with steel special anti-rust paint comprehensively covering, and then coated with high quality topcoat. The rotating part should be divided by warning color.